An Eddy current magnetic actually repel the non-ferrous metals, such as aluminium caps and rings from PET bottles, Auto and white goods separation, fluff from metal fragmentation processing can be run over an eddy current, which will pull out non-ferrous material. Shredded computer items can be run over for aluminium, gold, and silver (if the precious metal isn’t held down in other components). Wood waste can contain stainless steel and aluminium conduits and medical waste and other electrical components. Eddy current magnetic will throw this material from the rest of the scrap from which it is being separated.

When a piece of non-ferrous metal, such as aluminum, passes over the separator, the magnets inside the rotor rotate past the aluminum at high speed. This forms eddy currents in the aluminum which in turn create a magnetic field around the piece of aluminum. The polarity of that magnetic field is the same as the rotating magnet, causing the aluminum to be repelled away from the magnet. This repulsion makes the trajectory of the aluminum greater than that of the nonmetallics, allowing the two material streams to be separated.

Important: When looking at an Eddy current separator, the waste travelling over the magnetic must be in a thin layer to allow the magnetic perform to its best, in case processed metal waste is mixed with ferrous metal. The Ideal format for any metal separation is first magnetic ferrous discharge, onto a vibration conveyor to spread out and further separate the remaining metals to allow the Eddy current magnetic to work at its optimal efficiency.

Also Particle size can matter, since the eddy current depends on surface area. Pieces of scrap that are a half-inch in size or larger work best.

Other advantage

• Magnetic drum and head pulley could be supplied together with eddy current seperator if you need. 
• Not only the single equipment could be manufactured, but also supply the whole recycling line. 
• Sncerely welcome you to come to visit us for future business relationships and mutual success.

 Fushun Ejet Magnetic Equipment Co.,Ltd is a manufacturer of Magntic Equipment with well-equipped professional engineers and strong technical force.

Our main products are eddy current separator, suspended magnetic separator,lifting magnets,etc.

With good quality, reasonable prices,our products are extensively used in solid waste treatment, metallurgical mine, power plants, coal mining and other industries. The products have been exported to the United States, Canada, Japan and Australia.

We welcome new and old customers to contact us for future business relationships and mutual success! 

Q:What kind of metal is eddy current applied to?

A:Eddy Current Separator suitable for aluminum, copper, brass.etc non-ferrous scraps separation from non - metal materials of size >3mm.

Q: Which type should I use for my recycling plant?

A: In order to recommend the most suitable model, please let us know the material`s situation .including the composition , size ,handling capacity and expected separation result .

Q:What are the pros and cons between a concentric pole rotor compared with and eccentric rotor design?

A: The eccentric type is much suitable for complicated material situation , The eccentric rotor design reduces long-term wear due to heated ferrous build up ,can effectively avoid the device damage caused by impurity ferrous metal.  

Exclusive the ferrous influence , the concentric type have a little bit better separation effect,but must make sure no ferrous exist.