-
Phone
86-24-54112666
-
Address
No. 23, Pacific Industrial City, Economic Development Area, Fushun, Liaoning, China
-
E-mail
Non-ferrous alloy metal removal machine for glass cullet recycling industry
Fushun Ejet Magnetic Equipment Co.,Ltd, is a professional manufacturer of Magnetic equipment, specialize in researching ,developing and manufacturing the magnetic separation equipment and resources recycling equipment, the products are extensively used in
Description
Non-ferrous alloy metal removal machine for glass cullet recycling industry
Eddy Current Separator using powerful Rare Earth permanent magnets to process through produces repelling forces for non-ferrous metal scraps separation,Ideal for the recycling industry to recovery or remove non-ferrous metal ,such as aluminum, non-ferrous alloy metal, copper,brass .etc.The separation efficiency is good for a wide range of wherever separation of non-ferrous metals from a product stream(such as plastics, glass, electronic scrap, automobile shredder residue, bottom ash, foundry sand, trash, co-mingle recyclables etc). can give a more valuable product, whether the end use is in recycling, waste reduction, raw material production or any other process .
Standard Features and Benefits for non-ferrous metal/alloy removal machine
- The Rare Earth Arched Rotor is even effective “popping” small aluminum particles.
- Our new, high speed bearing design allows a 25% higher rotor speed for exceptional purity.
- The rotor can be operated in forward or reverse, accommodating different particle characteristics.
- EJET` Eddy Current rotors/pulleys/rollers are high tension, carbon fiber wrapped for low vibration and long life.
- A special splitter provides exceptional straightness for optimum plastic purity and yield.
- The splitter is adjustable in both angle & height to satisfy a range of belt speeds & particle sizes.
- PET flake process rates up to 2500 lbs/hr/ft of feeder width can be achieved.
- A 1.3 mm thin, abrasion resistant urethane conveyor belt maximizes the aluminum “pop”.
- A vibratory feeder assures a controlled flake depth to enhance the separation performance,and sometimes a magnetic drum will be installated after the vibrating feeder to protect the precious nonferrous separation machine.
- The Control Cabinetinclude a belt speed tachometer.
- Withstand severe outdoor environments and dirty, dusty surroundings found at many job sites.
important:
1.when the waste travelling over the eddy current magnetic rotor must be in a thin layer to allow the magnetic perform to its best.so normally one vibration machine should be associated with the eddy current to spread the waste out firstly
2.To avoid the eddy current belt and eddy current magnetic rotor damage caused by impurity ferrous metal. . The Ideal format for any metal separation is first magnetic ferrous separation,
Model | Belt Width mm | Motor Power(KW) | Dimension(mm) | Weight | ||||
Rotor Motor | Belt Gear Motor | Vibratory feeder | Length | Width | High | Kg | ||
ECS-30P | 300 | 2.2 | 0.75 | 0.12+0.12 | 2080 | 1117 | 1285 | 900 |
ECS-40P | 460 | 3.0 | 0.75 | 0.12+0.12 | 3760 | 1357 | 1285 | 1100 |
ECS-65P | 650 | 4.0 | 1.5 | 0.25+0.25 | 3760 | 1650 | 1285 | 2000 |
ECS-80P | 800 | 4.0 | 1.5 | 0.25+0.25 | 3760 | 2000 | 1285 | 2500 |
ECS-100P | 1000 | 5.5 | 2.2 | 0.25+0.25 | 3760 | 2300 | 1285 | 2900 |
ECS-120P | 1200 | 5.5 | 2.2 | 0.55+0.55 | 4160 | 2400 | 1285 | 3600 |
ECS-140P | 1400 | 5.5 | 2.2 | 0.75+0.75 | 4160 | 2600 | 1285 | 3800 |
ECS-160P | 1600 | 5.5 | 2.2 | 0.75+0.75 | 4160 | 2800 | 1285 | 3900 |
ECS-180P | 1800 | 5.5 | 2.2 | 0.75+0.75 | 4160 | 3000 | 1285 | 4000 |
Separation materials display:
eddy current non-ferrous separators offer a cost effective method of recovering up to 98% of valuable material from waste scaps. It also improves the purity of non-ferrous auto scrap up to 98-99%.are useful in aluminium, copper, zinc ect nonferrous metal recovery from a variety of conveyed dry waste materials such as:
| ||
Separation aluminum/copper caps and rings from crushed glass bottles scrap | Recovery of aluminum/copper from crushed PET bottles | Effeciently and accuratly separation nonferrous from rubber scraps/powder |
 | ||
| Beverage cans (aluminum/steel cans plastic/glass bottles) sorting from waste streams | Processing of aluminum molding sand in aluminum-shell-sand recycling lines | For wood processing industry to Separate non-ferrous metals from wood waste |
1.Packing:Export packing for Non-ferrous alloy metal removal machine
2.Shipping time: 40 days after receive the deposit
Fushun Ejet Magnetic Equipment Co.,Ltd is a manufacturer of Magntic Equipment with well-equipped professional engineers and strong technical force.
Our main products are eddy current separator, suspended magnetic separator,lifting magnets,etc.
With good quality, reasonable prices,our products are extensively used in solid waste treatment, metallurgical mine, power plants, coal mining and other industries. The products have been exported to the United States, Canada, Japan and Australia.
We welcome new and old customers to contact us for future business relationships and mutual success!
FAQ
Q:What kind of metal is eddy current separator applied to?
A:Eddy Current Separator suitable for aluminum, copper, brass.etc non-ferrous scraps separation from non - metal materials of size >3mm.
Q: Which type should I use for my recycling plant?
A: In order to recommend the most suitable model, please let us know the material`s situation .including the composition , size ,handling capacity and expected separation result .
Q:What are the pros and cons between a concentric pole rotor compared with and eccentric rotor design?
A: The eccentric type is much suitable for complicated material situation , The eccentric rotor design reduces long-term wear due to heated ferrous build up ,can effectively avoid the device damage caused by impurity ferrous metal.
Exclusive the ferrous influence , the concentric type have a little bit better separation effect,but must make sure no ferrous exist.
Most suitable machine would be recomended to you according to your informations,such as:
- Suspended over-belt magnetic separator
- Eddy current nonferrous metal,non-ferrous alloy separator
- Magnetic driving head/tail pulley
- Magnetic drum separator
- Magnetic iron removal block
- Grate magnetic separator
- Magnetic filter chute
Any require,please kindly contact us:
FUSHUN EJET MAGNETIC EQUIPMENT CO.,LTD
Jasmine Song
TEL: +86 24 54012777
MOBILE: +86 15242300557 (WhatsApp/Wechat)
SKYPE: luckjasmine86
EMAIL: 
